Chapter 1 MicroLog
62
Temperature unit
To set the temperature unit in the MicroLog display,
select the option you want (Celsius or Fahrenheit).
Interval
Determines the logging interval, or the time interval
between successive data recordings.
The time format is hh:mm:ss. Set the time setting to
select a recording time interval from between 10 seconds
and 2 hours. For example, to set a time interval of one
hour, five minutes and thirty seconds, click the hours (hh)
and type 1 or use the arrows to select 01, then click the
minutes (mm) and type 5 or use the arrows, and finally,
click the seconds (ss) and type 30 or select 30 using the
arrows.
To Next Page
Loading...