Freescale Semiconductor MC68332 - 3.2 System Block Diagram and Pin Assignment Diagrams

OVERVIEW MC68332
3-2 USER’S MANUAL
3.1.4 Queued Serial Module (QSM)
• Enhanced Serial Communication Interface (SCI), Universal Asynchronous Re-
ceiver Transmitter (UART): Modulus Baud Rate, Parity
• Queued Serial Peripheral Interface (SPI): 80-Byte RAM, Up to 16 Automatic
Transfers
• Dual Function I/O Ports
• Continuous Cycling, 8–16 Bits per Transfer
3.1.5 Static RAM Module with TPU Emulation Capability (TPURAM)
• 2-Kbytes of Static RAM
• May be Used as Normal RAM or TPU Microcode Emulation RAM
3.2 System Block Diagram and Pin Assignment Diagrams
Figure 3-1 is a functional diagram of the MCU. Although diagram blocks represent the
relative size of the physical modules, there is not a one-to-one correspondence be-
tween location and size of blocks in the diagram and location and size of integrated-
circuit modules. Figure 3-2 shows the pin assignments of the 132-pin plastic surface-
mount package. Figure 3-3 shows the pin assignments of the 144-pin plastic surface-
mount package. Refer to APPENDIX B MECHANICAL DATA AND ORDERING IN-
FORMATION for package dimensions. All pin functions and signal names are shown
in this drawing. Refer to subsequent paragraphs in this section for pin and signal de-
scriptions.
Fr
ees
cale S
em
iconduct
or
, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...