Frick QUANTUM - MAIN MENU SELECTION - Analog Calibration SCREEN

FRICK QUANTUM CONTROL PANEL
OPERATION
S90-010 O
Page 53
[No Access] - Select this key to change the current
access privilege to no access. This cancels security
access to the system. A password must be reentered
to gain security access after pressing this key.
MAIN MENU SELECTION - ”Analog Calibration” SCREEN
!!! Warning Entering Calibration Screens !!!
You are attempting to modify critical system control
settings. Any modifications of these settings may have a
significant impact on the operation and performance of
the pertinent equipment. By undertaking to modify these
settings, you are assuming all responsibility for those
actions. At the very minimum, prior to any such action, you
should have thoroughly read and understood all manuals
and literature accompanying the unit. IMPROPER
CONTROL SETTINGS MAY CREATE AN OPERATING
CONDITION WHERE THERE IS THE POTENTIAL OF
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.