98
* Given sufficient power supply from Fronius Solar Net, the green LED lights up on
every DATCOM component.
If the green LED does not light up, the power supply unit available from Fronius
should be inserted into the 12 V power supply connection socket of an external
DATCOM component.
Check the cable and plug connections if necessary.
Examples of external DATCOM components: Fronius String Control, Fronius Sen-
sor Box, etc.
Switching capacity of digital outputs when
supplied by an external power supply with
min. 10.7–max. 24 V DC
1 A, 10.7–24 V DC
(depending on the external power supply)
per digital output
Max. switchable inductive loads on the digi-
tal outputs
76 mJ
(per output)
Modbus RTU RS-485 2-wire
Factory setting of RS-485 interface:
Speed
Data frame
9600 baud
1 start bit
8 data bits
no parity
1 stop bit