7
3 Warranty terms
The use of this equipment implies the total accordance with the terms described in this manual and
exempts the manufacturer from any responsibility regarding to product misuse.
Read all the information in this manual before starting the product installation.
This product must be installed and tuned by specialized auto shops and/or personnel with experience on
engine tuning.
Before starting any electric installation, disconnect the battery.
The inobservance of any of the warnings or precautions described in this manual might cause engine damage and
lead to the invalidation of this product warranty. The improper use of the product might cause engine damage.
This product does not have a certification for the use on aircraft or any flying devices, as it has not been designed
for such use purpose.
In some countries where an annual inspection of vehicles is enforced, no modification in the OEM ECU is
permitted. Be informed about local laws and regulations prior to the product installation.
Important warnings for proper installation of this product:
Always cut the unused parts of cables off NEVER roll up the excess
The black wire of the harness MUST be connected directly to the , as well as
The use of the 16 way harness is mandatory, even when connecting the FT500 on an installation for
previous FT ECUs.
WARNING
It is a good practice to save your maps on the PC, as a security backup. In case of problems with your ECU,
this will be the guarantee that your calibrations are saved. In some cases, when the ECU is upgraded by the
factory, its memory may be erased also.
Limited Warranty
This product warranty is limited to one year from the date of purchase and covers only manufacturing defects
warranty. In case of product exchange, please contact FuelTech tech support.
Damages caused by misuse of the unit are not covered by the warranty. This analysis is done by FuelTech tech
support team.
The violation of the warranty seal results in the invalidation of the Product Warranty.
Manual version 1.2 June/2015
ECU version 1.40
To Next Page
Loading...