Fuji Electric Frenic-Mini - Options for Operation and Communications; 1 ] External Potentiometer for Frequency Setting

6.4 Selecting Options
6-33
Chap. 6 SELECTING PERIPHERAL EQUIPMENT
6.4.2 Options for operation and communications
[ 1 ] External potentiometer for frequency setting
An external potentiometer may be used to set the drive frequency. Connect the potentiometer to
control signal terminals [11] to [13] of the inverter as shown in Figure 6.14.
Model: RJ-13 (BA-2 B-characteristics, 1 kΩ)
Model: WAR3W (3W B-characteristics, 1 kΩ)
Figure 6.14 External Potentiometer Dimensions and Connection Example