1.3 Recommended Configuration
1-11
Chap. 1 INTRODUCTION TO FRENIC-Mini
1.3 Recommended Configuration
To control a motor with an inverter correctly, you should consider the rated capacity of both the motor
and the inverter and ensure that the combination matches the specifications of the machine or system
to be used. Refer to Chapter 7, "SELECTING OPTIMAL MOTOR AND INVERTER CAPACITIES"
for details.
After selecting the rated capacity, select appropriate peripheral equipment for the inverter, then
connect them to the inverter.
Refer to Chapter 6, "SELECTING PERIPHERAL EQUIPMENT" and Chapter 8, Section 8.7
"Connection Diagrams" for details on the selection and connection of peripheral equipment.
Figure 1.9 shows the recommended configuration for an inverter and peripheral equipment.
Figure 1.9 Recommended Configuration Diagram
DC reacto
Molded case circuit breaker
or
Earth leakage circuit breaker
(with overcurrent protection)
To Next Page
Loading...
