6.4 Selecting Options
6-37
Chap. 6 SELECTING PERIPHERAL EQUIPMENT
6.4.3 Extended installation kit options
[ 1 ] Mounting adapters
FRENIC-Mini series of inverters can be installed in the control board of your system using mounting
adapters which utilize the mounting holes used for conventional inverters (FVR-E11S series of 0.75
kW or below or 3.7 (4.0) kW). The FVR-E11S-2/4 (1.5 kW/2.2 kW) and FVR-E11S-7 (0.75 kW/1.5
kW) models may be replaced with the FRENIC-Mini series inverters without the use of adapters.
Table 6.15 Mounting Adapters
Applicable inverter model
Option model
FRENIC-Mini FVR-E11S
FRN0001C2S-2
FRN0002C2S-2
FRN0004C2S-2
FRN0006C2S-2
FVR0.1E11S-2
FVR0.2E11S-2
FVR0.4E11S-2
FVR0.75E11S-2
MA-C1-0.75
FRN0001C2S-7
FRN0002C2S-7
FRN0004C2S-7
FRN0006C2S-7
FVR0.1E11S-7
FVR0.2E11S-7
FVR0.4E11S-7
MA-C1-3.7
FRN0020C2S-2
FRN0011C2S-4
FRN0012C2S-7
FVR3.7E11S-2
FVR3.7E11S-4
FVR4.0E11S-4
FVR2.2E11S-7
Note: A box () in the above table replaces A, C, E, or U depending on shipping destination.
To Next Page
Loading...
