5.2 Overview of FRENIC Loader
5-9
Chap. 5 RUNNING THROUGH RS-485 COMMUNICATIONS
5.2.3.3 Test-running
The test-running feature allows you to test-run the motor in the forward or reverse direction while
monitoring the running status of the selected inverter.
Operation
buttons
Operationsta
tus
Shows FWD,
REV, STOP
and alarm
codes.
Select the frequency and run
command sources and click
Apply.
Select monitor item
Select the operation
status information to be
monitored in real-time.
Reference
frequency
LED monitor
Shows the running status (output frequency,
current, etc.).
To Next Page
Loading...
