Fuji Electric Frenic-Mini - A Codes (Motor 2 Parameters)

9.2 Details of Function Codes
9-107
Chap. 9 FUNCTION CODES
9.2.6 A codes (Motor 2 parameters)
A01 Maximum Frequency 2 F03 (Maximum Frequency 1)
A02 Base Frequency 2 F04 (Base Frequency 1)
A03 Rated Voltage at Base Frequency 2 F05 (Rated Voltage at Base Frequency 1)
A04 Maximum Output Voltage 2 F06 (Maximum Output Voltage 1)
A05 Torque Boost 2 F09 (Torque Boost 1)
A06
Electronic Thermal Overload Protection for Motor 2
(Select motor characteristics) F10 (Electronic Thermal Overload Protection for
Motor 1, Select motor characteristics)
A07
Electronic Thermal Overload Protection for Motor 2
(Overload detection level) F11 (Electronic Thermal Overload Protection for
Motor 1, Overload detection level)
A08
Electronic Thermal Overload Protection for Motor 2
(Thermal time constant) F12 (Electronic Thermal Overload Protection for
Motor 1, Thermal time constant)
A09
DC Braking 2 (Braking starting frequency)
F20 (DC Braking 1, Braking starting frequency)
A10 DC Braking 2 (Braking level) F21 (DC Braking 1, Braking level)
A11 DC Braking 2 (Braking time) F22 (DC Braking 1, Braking time)
A12 Starting Frequency 2 F23 (Starting Frequency 1)
A13
Load Selection/Auto Torque Boost/Auto Energy Saving Operation 2
F37 (Load Selection/Auto Torque Boost/Auto Energy Saving Operation 1)
A14 Control Mode Selection 2 F42 (Control Mode Selection 1)
A16 Motor 2 (Rated capacity) P02 (Motor 1, Rated capacity)
A17 Motor 2 (Rated current) P03 (Motor 1, Rated current)
A18 Motor 2 (Auto-tuning) P04 (Motor 1, Auto-tuning)
A20 Motor 2 (No-load current) P06 (Motor 1, No-load current)
A21 Motor 2 (%R1) P07 (Motor 1, %R1)
A22 Motor 2 (%X) P08 (Motor 1, %X)
A23
Motor 2 (Slip compensation gain for driving)
P09 (Motor 1, Slip compensation gain for driving)