6-38
[ 2 ] Rail mounting bases
A rail mounting base allows any of the FRENIC-Mini series of inverter to be mounted on a DIN rail
(35 mm (1.38 inches) wide).
Table 6.16 Rail Mounting Base
Option model Applicable inverter type
FRN0001C2S-2
FRN0002C2S-2
FRN0004C2S-2
FRN0006C2S-2
FRN0001C2S-7
FRN0002C2S-7
FRN0004C2S-7
FRN0006C2S-7
FRN0001C2S-6U
FRN0002C2S-6U
FRN0003C2S-6U
RMA-C1-0.75
FRN0001C2E-7
FRN0002C2E-7
FRN0004C2E-7
FRN0010C2S-2
FRN0012C2S-2
FRN0002C2S-4
FRN0004C2S-4
FRN0005C2S-4
FRN0007C2S-4
FRN0010C2S-7
FRN0002C2E-4
FRN0004C2E-4
RMA-C1-2.2
FRN0006C2E-7
FRN0020C2S-2
FRN0011C2S-4
FRN0012C2S-7
FRN0005C2E-4
FRN0007C2E-4
FRN0011C2E-4
RMA-C1-3.7
FRN0010C2E-7
FRN0012C2E-7
Note 1: A box () in the above table replaces A, C, E, or U depending on shipping destination.
Note 2: This rail mounting base is not suitable for the inverters of 5.5 kW (7.5 HP) or above.
To Next Page
Loading...
