6-36
[ 4 ] Extension cable for remote operation (CB-S)
The extension cable connects the inverter with the remote keypad to enable remote operation of the
inverter. The cable is a straight-wired type with RJ-45 jacks and its length is selectable from 5 m (16.4
ft), 3 m (9.8 ft), and 1 m (3.3 ft).
Type Length m (ft)
CB-5S 5 (16.4)
CB-3S 3 (9.8)
CB-1S 1 (3.3)
[ 5 ] Inverter support loader software
FRENIC Loader is support software which enables the inverter to be operated via the RS-485
communications facility. The main functions include the following:
- Easy editing of function code data
- Monitoring the operation statuses of the inverter such as I/O monitor and multi-monitor
- Operation of inverters on a PC screen (Windows-based only)
Refer to Chapter 5 "RUNNING THOUGH RS-485 COMMUNICATION" for details.
To Next Page
Loading...
