Fuji Electric Frenic-Mini - Page 21

1.1 Features
1-5
Chap. 1 INTRODUCTION TO FRENIC-Mini
• External dimensions compatible with Fuji FVR-C11S series,
externals compatible with original FRENIC-Mini series (FRNC1-)
The external differences (improved points) from the conventional FRNC1- are as
follows.
Screw added to the control circuit terminal block cover, which prevents the cover from coming off due
to vibration or unexpected incident.
Control circuit terminal block using commonly used slotted screws instead of Phillips-head ones,
which standardizes tools.
Simplified operation and wiring
• Frequency setting potentiometer provided as standard
The frequency can be adjusted easily by hand.
• Easy-to-remove terminal block covers (for control circuit and main circuit) that are secured
with a single screw.
As shown below, the terminal block covers for the control circuit and main circuit can be removed
easily by removing the single screw from the control circuit terminal block cover.
Main circuit terminal
block cover
Control circuit terminal block cover