1.1 Features
1-9
Chap. 1 INTRODUCTION TO FRENIC-Mini
• Remote operation
Using the remote keypad (option) together with remote operation extension cable enables you to easily
operate the inverter from a remote location.
Refer to Chapter 5, "RUNNING THROUGH RS-485 COMMUNICATION" and Chapter 6,
"SELECTING PERIPHERAL EQUIPMENT" for details.
Wide variations
The wide range of models available in the FRENIC-Mini series of inverters is certain to flexibly meet
your various system needs.
• Three-phase 200/230 V series; 0.1 to 15 kW (1/8 to 20 HP)
• Three-phase 400/460 V series; 0.4 to 15 kW (1/2 to 20 HP)
• Single-phase 200/230 V series; 0.1 to 2.2 kW (1/8 to 3 HP)
• Single-phase 115 V series; 0.1 to 0.75 kW (1/8 to 1 HP)
• Model with a built-in EMC filter is available on order
Refer to Chapter 8, "SPECIFICATIONS" for details.
Global products
The FRENIC-Mini series of inverters is designed for use in global market in conformity with the
global standards listed below.
• All standard models conform to the EC Directive (CE Marking), UL standards (UL-Listed)
and Canadian standards (cUL-Listed).
All standard FRENIC-Mini inverters conform to European and North American/Canadian standards,
enabling standardization of the specifications for machines and equipment used at home and abroad.
• If a model with a built-in EMC filter is used, the model conforms to the European EMC
Directive.
To Next Page
Loading...
