Fuji Electric PXR3 - Canceling the Alarm Latch

15
Canceling the alarm latch (Setting range: 0/1) (Option)
[Description]
• This parameter cancels the alarm latch when it is latching.
[Setting example] Opening up the alarm latch
Related parameters:
to (page 54)
Press and hold the key for one second.
will be displayed.
Pressing the or keys to flicker and to display .
(Repeat the procedure from 3 to 5 to check the set value.)
Press the key once.
The current setting ( ) is displayed.
Press the key to display .
SEL
SEL
SEL
1.
4.
If you want to display the operation status, press and hold the key for two seconds.
The SV is displayed on the display area.
If unoperated state continues, the PV will be displayed.
6.
2.
3.
Press the key once.
SEL
5.
Display Operating procedure
PV indication
PV indication
SV indication