Fuji Electric PXR3 - Station No. for Communication

64
[Description]
• Do not set the same number as other Micro-controllers.
Station No. for communication (Setting range: 0 to 255) (Option)
[Setting example] Setting the station No. to "123"
If you want to display the operation status, press and hold the key for two seconds.
The SV will be displayed on the display area.
Press the key once. will be displayed and will be registered for . After that,
the controller will operate with the station number being 123.
Press and hold the key for five seconds.
will be displayed.
Press the or keys to flicker and to display .
(Repeat the procedure from 3 to 5 to check the set value.)
Press the key once.
The current setting ( ) will be displayed.
Press the key to display .
SEL
SEL
SEL
1.
4.
6.
2.
3.
SEL
5.
Display Operating procedure
PV indication
PV indication
SV indication
If unoperated state continues, the PV will be displayed.