Fuji Electric PXR3 - Displaying ON-Delay Alarm or the Remaining Time of Timers

17
,
Displaying ON-delay alarm or the remaining time of timers (unit: seconds) (Option)
[Setting example] Displaying ON-delay alarm or the remaining time of timers
[Description]
• These parameters display the remaining time of Timers 1
and 2.
• The remaining time of the ON/OFF-delay timer is counted
down. When the counter shows , the alarm relay is
closed.
• During count-down, if the PV changes to the value of the
temperature at which the alarm is set to OFF, or if “DI”
for the timer is set to OFF, the counter is reset, and the
alarm relay is opened.
SEL SEL
， display parameter
•
Press and hold the key for one second.
will be displayed.
Press the key to display . By pressing the key,
the remaining time (10 seconds) of the timer 1 will be displayed. Pressing the key again,
it returns to display.
SEL
SEL
SEL
SEL
1.
If you want to display the operation status, press and hold the key for two seconds.
The SV is displayed on the display area.
If unoperated state continues, the PV will be displayed.
4.
2.
Press the key to display . By pressing the key, the remaining time (8 seconds)
of the timer 2 will be displayed. Pressing the key again, it returns to display.
SEL
SEL
3.
Display Operating procedure
PV indication
PV indication
SV indication