3 Copy
114
Copy
3
2 Select any option.
îš„Off
Does not fold copies.
îš„Z Fold
Folds copies in three with the printed side inside or outside.
îš„C Fold
Folds copies in three with the printed side inside or outside.
îš„Single Fold
Folds copies in half.
îš„Image Inside Fold
Folds copies so that the image is printed inside.
îš„Image Outside Fold
Folds copies so that the image is printed outside.
îš„Trimming
When the Squarefold Trimmer Module (optional) is installed, this option is displayed if
you select [Single Fold]. You can select whether to trim the fore edge of booklets.
Refer to "[Trimming] Screen" (P.114).
[Trimming] Screen
When the Squarefold Trimmer Module (optional) is installed, [Trimming] becomes
available if you select [Single Fold] on the [Folding] screen.
Trimming is a feature that trims the fore edge of a booklet, which is opposite of the
booklet spine, in order to finish the edge neatly.
printing surface
comes inside
printing surface
comes outside
printing surface
comes inside
printing surface
comes outside
To Next Page
Loading...
Need help?
General
