EasyManuals Logo

Fuji Xerox DocuCentre-II 3005 User Manual

Fuji Xerox DocuCentre-II 3005
615 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #471 background imageLoading...
Page #471 background image
Error Code
469
Problem Solving
16
016-577
O [Cause] Unable to connect to the FTP service of the destination
server.
[Remedy]Take one of the following actions:
z
Check if the FTP service of the server is activated.
z
Check if the FTP port number of the server is correctly
registered on the machine.
016-578
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature due to unsuccessful login to the FTP
server.
[Remedy] Check if the login name (user name) and password are
correct.
016-579
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the scanned image could
not be saved in the FTP server after connection.
[Remedy] Check if the FTP server’s save location is correct.
016-580
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the file or folder name on the
FTP server could not be retrieved after connection.
[Remedy] Check the access privilege to the FTP server.
016-581
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the suffix of the file or folder
name exceeded the limit after connection.
[Remedy] Change the file name, or change the destination folder on
the FTP server. Or, move or delete files from the
destination folder.
016-582
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because file creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
z
Check if the specified file name can be used in the save
location.
z
Check if enough space is available in the save location.
016-583
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because lock folder creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
z
If any lock directory (.LCK) exists in the forwarding
destination, delete it manually, then try executing the job
again.
z
Check if the specified folder name can be used in the
save location.
z
Check if the same folder name exists in the save
location.
z
Check if enough space is available in the save location.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-II 3005

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-II 3005 and is the answer not in the manual?

Fuji Xerox DocuCentre-II 3005 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-II 3005
CategoryAll in One Printer
LanguageEnglish

Related product manuals