Common Service Settings
139
Tools
5
îš„Disabled
Does not display the items specified in [Paper Size].
îš„Size Detection
Displays the setting in [Paper Size].
îš„Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen or not.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 to 4. You cannot apply this setting to Tray 5.
Paper Tray Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays or print data does not include the paper tray information for automatic
tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
This setting applies to Trays 1 to 4. You cannot set this setting to Tray 5.
Note • When a logical printer is used and if you specify the paper tray with the print driver, this
setting will be ignored.
Paper Type Priority
Set the priority of the trays to use when paper of the same size and the same orientation is
set in the multiple trays for automatic tray selection.
Auto Paper selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
You can set Plain paper, Bond paper, Recycled paper, Plain Reload paper, Heavyweight
paper, Gloss paper, Heavyweight A paper, Heavyweight B paper, Heavyweight C paper,
Heavyweight S paper, and Custom paper 1 to 5.
The paper type setting is prioritized over the paper tray priority settings.
If, however, different paper types appear in the same priority sequence, the paper is
determined by paper tray priority sequence. The tray set to [Auto Paper Off] is not selected by
automatic tray selection.
For more information about the tray priority sequence, refer to "Paper Tray Priority" (P.139).
Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Supply] when copying with
Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray 5]
screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
îš„A/B Series Size
You can select a paper size from A and B series sizes.
îš„Inch Size
You can select a paper size from inch series sizes.
To Next Page
Loading...
Need help?
General
