Error Code
473
Problem Solving
14
027-752
O [Cause] A mandatory entry field is blank in the job flow.
[Remedy] Take one of the following measures:
z
Do not link folders to job flows that have mandatory entry
fields.
z
Set the default values to the mandatory fields of the job
flow.
027-753
O [Cause] 1) Attempted to execute the service while the port
necessary for the job flow is either deactivated or
disabled.
2) Attempted to execute a job flow to send e-mail using the
Encryption or Digital Signature feature while S/MIME
communication is disabled.
[Remedy] For 1), have your system administrator confirm the port
status.
For 2), enable S/MIME communication, or modify the job
flow so that e-mail is sent by not using the Encryption or
Digital Signature feature.
027-754
O [Cause] [DocuWorks Signature] or [PDF Signature] is set
inconsistency in the job flow.
[Remedy] Check the DocuWorks and PDF signatures for both the
system data settings (machine's current settings) and the
executed job flow settings. If these settings differ,
coordinate them.
027-761
O [Cause] An on-demand print job was sent to the machine using the
Web Applications feature, but the time interval from
receiving the print job until starting the print processing
exceeded the time limit specified on the machine.
[Remedy] When multiple documents are to be printed, reduce the
number of documents, and then execute the operation
again. If the error still is not resolved, enter the System
Administration mode, and then select [Tools] > [Common
Service Settings] > [Machine Clock/Timers] > [Print-On-
Demand Duration], and specify a larger value or "0".
When on-demand printing is executed using the Web
Application feature, the print processing time is limited.
Consequently if many documents are to be printed or if
print processing takes time, a timeout may occur before all
the data are received. To resolve this problem, change the
time limit value according to the document volume and
type. If the error still is not resolved, contact our Customer
Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
To Next Page
Loading...
