Fuji Xerox DocuPrint CP315 dw

7 Troubleshooting
147
Equally Spaced Colored Dots
Vertical Blanks
Problem Action
The printout has equally spaced
colored dots
1 Replace the drum cartridges and print a Demo Page for verification.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)" and "[Demo
Page] (P.44)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.
Problem Action
The printout has vertical blanks. 1 Clean inside the printer by using the cleaning rod and print a Demo Page for
verification.
Refer
• For details, see "Cleaning the LED Print Head (P.110)" and "[Demo
Page] (P.44)."
If the problem persists, proceed to step 2.
2 Make sure that the drum cartridges are installed correctly.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)."
If the problem persists, proceed to step 3.
3 Replace the drum cartridges and print a Demo Page for verification.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)" and "[Demo
Page] (P.44)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.