SYSTEM DIAGRAM
DIMENSIONS
Controller
z
Holder
z
Signal transmitter
Signal receiver
window
Control signal might not be recognized in following cases: ●
(i) A curtain or a wall, etc. exists between transmitter and receiver.
(ii) There is an instant-start type (inverter type, etc.) uorescent lamp
in the room.
Air conditioner might not work correctly when strong light hits the ●
signal receiver window. Shut off the direct sunlight and also keep the
illuminator far away from the receiver window.
Front View Rear View
Top View
Side View
Front View Side View Bottom View
(Unit : mm)
- (05 - 86) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
