PACKING LIST
The following installation parts are supplied. Use them as required.
Name and shape Quantity Application
Installation manual 1
Cable tie 3
For mounting the power supply cable, and
transmission cable.
Screw
(M4 × 20 mm)
4 For mounting the signal amplier.
Terminal resistor 1
It is used when there is no terminal resistor in a segment.
Dust proof bushing
1
For connecting the power supply cable.
Connecting wire
1
For setting the lter mode
WIRING SPECIFICATIONS
Use Size Wire type Remarks
Power supply cable
Maximum
1.25
mm
2
60245 IEC 57 or equivalent
1 ø AC208-240 V 50/60 Hz,
2-Wire + ground
(Always ground the unit)
Minimum
0.5
mm
2
Transmission cable
0.33
mm
2
(22AWG)
LEVEL4 (NEMA) non-polar 2
core, twisted pair solid core
Shielded
L
ON
W
ORKS
®
compatible cable
Fuse capacity 3 A
SPECIFICATIONS
Main specication
z
Power supply 1ø AC208-240 V 50/60 Hz
Input Power (W) 4.5
Temperature
(°C)
Operating 0 to 46
Packaged -10 to 60
Humidity (%) Packaged
0 to 95 (RH) ;
No condensation
Dimensions [H × W × D] (mm) 67 × 288 × 211
Weight (g) 1500
- (05 - 123) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
