2) Connect the remote controller cable to the connecting cable, and insert it to the connector.
Set the DIP switch (SW1) to "3WIRE" on the PC board of the indoor unit.
Indoor unit
PC board
Remote controller
cable
Connecting cable
Connector CNC01
(onboard)
Connect to earth
(ground) screw
Functional earthing
(If necessary)
Set to "3WIRE" the
DIP switch (SW1)
* Layout of Connector and PC board varies, depending on
the type of indoor unit
Connector
(adapter)
SW1
Indoor unit
PC board
PACKING LIST
Name and shape Quantity Application
Installation manual 1
Screw
(M4 × 16 mm)
2 For installing the external switch controller
Cable tie 5 For external switch controller and cable binding
WIRING SPECIFICATIONS
Use Size Wire type Remarks
Remote controller
cable
0.33
mm
2
(
22AWG
)
Polar 3-core
Use sheathed PVC cable or shielded
cable in accordance with the regional
cable standard.
External input /
output cable
0.33
mm
2
(
22AWG
)
Polar 2-core,
Twisted pair
Use shielded cable in accordance with
the regional cable standard.
SPECIFICATIONS
Power supply DC 12 V
Dimensions [H × W × D] (mm) 120 × 75 × 30
Weight (g) 100
- (05 - 126) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
