Fujitsu Airstage J-II - Page 543

z
Network convertor for L
ON
W
ORKS
®
setting (Set M)
Network
convertor for
L
ON
W
ORKS
®
*2
15
*1 : Setting up more than one Network Convertor in one VRF network system is prohibited.
*2 : The sum total of the Touch panel controller, Central remote controller, Network convertor for Group remote
controller and Network convertor for LONWORKS® is a maximum of 16.
Central remote controller setting (Set N)
z
00 01 02 03
Central remote controller (Max. 16) *2
*1 : Set Central remote controller address rst, to conduct the initial setting of it.
Refer to the "setting manual" for details.
*2 : The sum total of the Touch panel controller, Central remote controller, Network convertor for Group remote
controller and Network convertor for LONWORKS® is a maximum of 16.
- (07-17) -
FUNCTION SETTING FUNCTION SETTING