Fujitsu Airstage J-II - Page 618

SET4 setting
z
Drainage function switch (Slim Duct type only)
●
If contained drain pump is not used, set the drainage function to "Invalid" in the drainage
function switching.
(
u
...Factory setting)
SET4-1 Drainage function
u
OFF Valid
ON Invalid
*Note: Pls. be sure about water leakage from the indoor unit while changing setting.
Auto louver grille setting switch (Slim Duct type only)
●
When Auto louver grille kit (optional parts) is attached, set the Auto louver grille setting "Valid".
(
u
...Factory setting)
SET4-2 Auto louver grille setting
u
OFF Invalid
ON Valid
SET4-3 setting prohibited
●
(
u
...Factory setting)
SET4-3
u
OFF Fixed at OFF
ON Setting prohibited
SET4-4 setting prohibited
●
(
u
...Factory setting)
SET4-4
u
OFF Fixed at OFF
ON Setting prohibited
- (07-92) -
FUNCTION SETTING FUNCTION SETTING