Fujitsu Airstage J-II - Page 662

INDOOR UNIT ADDRESS VERIFICATION2-15-3.
1) Select the “10” in Menu 2 Settings. Then press the [ENTER] button.
2) Displayed from remote controller with smallest 2-wire remote controller address of the
remote controller group.
Indoor units displayed can be switched by [+] or
[-] button.
(a) Refrigerant circuit address (00 to 99)
(b) Indoor Unit address (00 to 63)
(c) System Number (002: Indoor unit)
(d) Remote controller address (01 to 32)
3) Press the [MENU] button to return to the Menu 2 item selection screen.
(a) (b)
(c) (d)
- (07-136) -
FUNCTION SETTING FUNCTION SETTING