EasyManua.ls Logo

Fujitsu AIRSTAGE J-IIIL - Page 146

Fujitsu AIRSTAGE J-IIIL
904 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model name ASUB18TLAV1 ASUB24TLAV1
Power supply 1 phase ~ 208/230 V 60 Hz
Available voltage range 187—253 V
Capacity
Cooling
Btu/h 18,000 24,000
kW 5.3 7.0
Heating
Btu/h 20,000 27,000
kW 5.9 7.9
Input power W 32 60
Fan
Airflow rate
HIGH
CFM (m
3
/h)
494 (840) 647 (1,100)
MED 453 (770) 536 (910)
LOW 406 (690) 430 (730)
Type × Q'ty Crossflow × 1
Motor output W 42
Sound pressure level*
2
HIGH
dB (A)
41 48
MED 39 43
LOW 35 35
Heat exchanger type
Length in (mm)
Main: 32-3/16 (817)
Sub1: 32-3/16
(817)
Sub2: 32-3/16 (817)
Fin pitch FPI
Main: 21
Sub1: 18
Sub2: 18
Rows × Stages
Main: 2 × 18
Sub1: 1 × 4
Sub2: 1 × 4
Face area
ft
2
(m
2
)
3.3 (0.31)
Pipe type (Material) Grooved H-pin (Copper)
Fin
Type (Material) Slit (Aluminum)
Surface treatment Hydrophilic coating
Air filter
Type Deodorization/Anti-mold
Net material PP monofilament net
Enclosure
Material Plastic
Color
White
Approximate color of Munsell N9.25/
Dimensions
(H × W × D)
Net
in (mm)
12-5/8 × 39-5/16 × 9-3/8 (320 × 998 × 238)
Gross 12-5/16 × 42-15/16 × 16-7/8 (329 × 1,090 × 429)
Weight
Net
lb (kg)
33 (15)
Gross 42 (19)
Connection pipe diameter
Liquid (Flare)
in (mm)
Ø 1/4 (6.35) Ø 3/8 (9.52)
Gas (Flare) Ø 1/2 (12.70) Ø 5/8 (15.88)
Drain hose I.D.: Ø 9/16 (13.8); O.D.: Ø 5/8 to 11/16 (15.8 to 16.7)
NOTES:
Specifications are based on the following conditions:
Cooling: Indoor temperature of 80 °FDB/67 °FWB (26.7 °CDB/19.4 °CWB), and outdoor temperature of 95 °FDB/75 °FWB (35 °CDB/23.9 °CWB).
Heating: Indoor temperature of 70 °FDB/60 °FWB (21.1 °CDB/15.6 °CWB), and outdoor temperature of 47 °FDB/43 °FWB (8.3 °CDB/6.1 °CWB).
Pipe length: 25 ft (7.5 m), Height difference: 0 ft (0 m). (Between outdoor unit and indoor unit.)
Protective function might work when using it outside the operation range.
*: Sound pressure level:
Measured values in manufacturer’s anechoic chamber.
Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
2-11. Wall mounted type - (04-22) - 2. Specifications
INDOOR
UNITS
INDOOR
UNITS

Table of Contents

Related product manuals