Fujitsu AIRSTAGE J-IIIL - Page 613

• Signal amplifier address (Set K)
1
2
3
Signal amplifier
(
Max. 8)
• Network convertor for LonWorks
®
setting (Set M)
NOTE: Setting up more than one Network convertor in one VRF network system is prohib-
ited.
15
Network convertor
for LONWORKS
®
*
*: The sum total of the Touch panel controller, Central remote controller, Network convertor for
Group remote controller
, Modbus convertor, and Network convertor for LonWorks is a maxi-
mum of 16.
1-3. Manual address setting method - (07-13) - 1. System settings
FUNCTION SETTINGS FUNCTION SETTINGS