U41842-J-Z125-1-76 13
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k02
Important Information
In this chapter you find essential information regarding safety when working on your
system.
Safety Instructions
I
For safety instructions see also the manual "Safety notes and other important
information".
This system meets the relevant safety regulations for IT equipment. If you have any
questions about whether you can install the CS800 system in the intended environment,
please contact your sales outlet or our customer service team.
V
CAUTION!
● The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install the system
including hardware and software.
● Some components of the ETERNUS CS800 system may be replaced by the
customer if they fail. These components are called Customer Replaceable Units
(CRUs). Other units may not be replaced by the customer. Please note that
unauthorized interference with the system will void the warranty and exempt the
manufacturer from all liability.
● Any failure to observe the guidelines in this manual, and any improper repairs
could expose the user to risks (electric shock, energy hazards, fire hazards) or
damage the equipment.
To Next Page
Loading...
Need help?
General