Safety Instructions Important Information
16 U41842-J-Z125-1-76
Working with CDs/DVDs and CD/DVD Drives
When working with devices with CD/DVD drives, these instructions must be followed.
V
CAUTION!
● Only use CDs/DVDs that are in perfect condition in your server's CD/DVD drive,
in order to prevent data loss, equipment damage and injury.
● Check each CD/DVD for damage, cracks, breakages etc. before inserting it in
the drive.
Note that any additional labels applied may change the mechanical properties
of a CD/DVD and cause imbalance.
Damaged and imbalanced CDs/DVDs can break at high drive speeds (data
loss).
Under certain circumstances, sharp CD/DVD fragments can pierce the cover of
the CD/DVD drive (equipment damage) and can fly out of the device (danger of
injury, particularly to uncovered body parts such as the face or neck).
I
You can prevent mechanical damage and damage to the CD/DVD drive, as well as
premature CD/DVD wear, by observing the following suggestions:
● Only insert CDs/DVDs in the drive when needed and remove them after use.
● Store the CDs/DVDs in suitable sleeves.
● Protect the CDs/DVDs from exposure to heat and direct sunlight.
To Next Page
Loading...
Need help?
General