EasyManuals Logo

Fujitsu ETERNUS CS800 Getting Started Guide

Fujitsu ETERNUS CS800
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Important Information Notes on Installing in the Rack
U41842-J-Z125-1-76 21
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k02
Notes on Installing in the Rack
V
CAUTION!
For safety reasons, at least two people are required to install the rack
model because of its weight and size.
Never lift the devices into the rack using the handles on the front panel.
When connecting and disconnecting cables, observe the relevant instructions
in the "Important Information" chapter of the technical manual for the corre-
sponding rack. The technical manual is supplied with the corresponding rack.
When installing the rack, make sure that the anti-tilt mechanism is correctly
fitted.
For safety reasons, no more than one unit may be removed from the rack at any
one time during installation and maintenance work.
If several units are simultaneously removed from the rack, there is a risk that the
rack could tip over.
The rack must be connected to the power supply by an authorized specialist
(electrician).
If the rack model is integrated into an installation that draws power from an
industrial power supply network with an IEC309 type connector, the power
supply's fuse protection must comply with the requirements for non-industrial
power supply networks for the type A connector.
Environmental Protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu Technology Solutions
standard for "environmentally friendly product design and development". This means that
key factors such as durability, selection and labeling of materials, emissions, packaging,
ease of dismantling and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-saving information
Devices that do not need to be constantly switched on should be switched off until they are
needed as well as during long breaks and after completion of work.

Table of Contents

Other manuals for Fujitsu ETERNUS CS800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ETERNUS CS800 and is the answer not in the manual?

Fujitsu ETERNUS CS800 Specifications

General IconGeneral
BrandFujitsu
ModelETERNUS CS800
CategoryStorage
LanguageEnglish

Related product manuals