Important Information Safety Instructions
U41842-J-Z125-1-76 17
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k02
Laser Information
The CD/DVD drive complies with IEC 60825-1 laser class 1.
V
CAUTION!
The CD/DVD drive contains a light-emitting diode (LED), which under certain
circumstances produces a laser beam stronger than laser class 1. Looking directly
at this beam is dangerous.
Never remove parts of the CD/DVD drive casing!
The FC HBAs (Fibre Channel Host Bus Adapters) also comply with IEC 60825-1 laser
class 1.
Class 1M Laser Product (PRO/10GbE SR Server Adapter)
The Laser device must be factory serviced ONLY by the responsible manufacturer! NO
adjustments, service or maintenance is to be performed otherwise.
V
CAUTION!
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Batteries
V
CAUTION!
● Incorrect replacement of batteries may lead to a risk of explosion. The batteries
may only be replaced with identical batteries or with a type recommended by
the manufacturer (see the technical manual for the system board).
● Do not throw batteries into the trash can. They must be disposed of in accor-
dance with local regulations concerning special waste.
● The battery must be disposed of in accordance with local regulations
concerning special waste.
● Replace the lithium battery on the system board in accordance with the instruc-
tions in the technical manual for the system board.
● All batteries containing pollutants are marked with a symbol (a crossed-out
garbage can). In addition, the marking is provided with the chemical symbol of
the heavy metal decisive for the classification as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
To Next Page
Loading...
Need help?
General