Installing the CS800 System in the Rack Installing the ETERNUS CS800 Components
48 U41842-J-Z125-1-76
Removing the Outer Telescopic Rail
Figure 23: Removing the outer telescopic rail
1. Extend the telescopic rail fully (1).
2. Unlock the outer telescopic rail and remove it.
With fully-extendable rails (a): Press the locking lever to release the server rail.
With partially extendable rails (b): Press the release spring to release the server rail.
3. Repeat the steps with the second telescopic rail.
a
b
1
1
To Next Page
Loading...
