Connectiing the CS800 with the Customer Network Initial Configuration
92 U41842-J-Z125-1-76
22. Click Yes to restart the system.
A message appears stating that you have to wait at least 15 minutes.
23. Disconnect the service laptop from the RX300 S5 server. Reset the computer network
settings back to its former values.
Connectiing the CS800 with the Customer Network
LAN Cabling
Connect the Ethernet cables to the RX300 S5 server as shown in figure 67 for NAS Basic
configuration and figure 68 for NAS Performance configuration.
I
The Ethernet cables are used for remote management and NAS connectivity.
Figure 67: Connecting the Ethernet Cables for NAS Basic Configuration
Possible Ethernet connections
1 Gbit/s 1 Gbit/s
The service port (X)
may not be used.
To Next Page
Loading...
