Initial Configuration Accessing and Completing the Setup Wizard
U41842-J-Z125-1-76 91
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.10 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k08
17. Click OK to continue.
The Date/Time Settings page displays (see figure 66).
Figure 66: Date/Time Settings
18. You can set date and time manually or by using an NTP server:
a) Select Manual to manually set the system date and time.
Click Edit to specify the system date. Use the drop down boxes to specify the
system time.
I
You can also choose to synchronize the system time with an NTP time
server. For more information, refer to the ETERNUS CS800 User Guide.
b) Select Use NTP to use a NTP server.
Select a Timeserver Pool or specify the server or pool by its IP address.
19. Select the Timezone.
20. Select the desired time format (24 hours or 12 hours).
21. Click Apply.
A message appears stating that completing the setup will restart the system.
To Next Page
Loading...
