Installing the CS800 System in the Rack Installing the ETERNUS CS800 Components
56 U41842-J-Z125-1-76
Installing the Front Cover
V
CAUTION!
The front covers of DX80 Basic and DX80 Expansion differ and may not be
confused.
1. Fit the front cover in the left end slot of the DX80 module to attach.
I
Be careful so that the part of the front cover to be fit in the slot does not touch
the power switch.
Figure 35: Installing the Front Cover (1)
2. Holding the tab on the front cover, attach the right side of the cover to the DX80 module:
Figure 36: Installing the Front Cover (2)
To Next Page
Loading...
