Fujitsu ETERNUS CS800 - Space Requirements for the Rack

Installing an ETERNUS CS800 Rack Space Requirements for the Rac
k
U41842-J-Z125-1-76 27
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k04
Space Requirements for the Rack
Figure 3: Installation and service areas required for the rack
Installation and maintenance area, rear Cable exit (ca.
ø
150) in double floor
Rack Anti-tilt bracket Floor plate for air inlet
Installation and maintenance area, front