Installing an ETERNUS CS800 Rack Handling Instructions
U41842-J-Z125-1-76 33
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k04
V
CAUTION!
The anti-tilt plate must make firm contact with the ground at the front.
Figure 10: Move central grounding point to the right if required
Figure 11:
1 Clamping nut M5
2 Mounting bracket
3 Allen screw M5x8mm
4 Allen screw M8x12mm
To Next Page
Loading...
