Installing an ETERNUS CS800 Rack Handling Instructions
U41842-J-Z125-1-76 35
Dokuschablonen qua19x24 Version 1.1us für FrameMaker V7.x vom 25.03.2010 © cognitas GmbH 2001-2010
1. April 2010 Stand 11:05.39 Pfad: G:\allgemein\CS800\1000500_FTS-Doku\1000502_GettingStartedGuide\GettingStarted.k04
Figure 15: Bracket mounted in the right corner at the rear of the rack. Insert bracket in the rear left corner of the
rack, tighten the screw M5x8 and move it to the right into position. Align screw thread M8 in the anti-tilt plate with
the drill hole of the mounting bracket and tighten the screw M8x12mm . Afterwards please mount the left bracket.
Figure 16: Tighten the screws
To Next Page
Loading...
