Fujitsu ETERNUS CS800 - Page 42

Locating the Mounting Position Installing the ETERNUS CS800 Components
42 U41842-J-Z125-1-76
Example
Figure 20: Possible positions of the ETERNUS CS800 modules in a rack
W
If the rack is empty at the time of installation, do NOT install the ETERNUS CS800
components too high in the rack. The weight of the components may cause the rack
to become “top heavy” and unstable if installed in the top of an empty rack.
DX80 expansion module 1
RX300 S5 server
DX80 basic module
DX80 expansion module 2
DX80 expansion module 3
DX80 expansion module 4
or
a
b
c
DX80 expansion module 1
RX300 S5 server
DX80 basic module
DX80 expansion module 2
DX80 expansion module 3
DX80 expansion module 4
a
b
c
:
:
:
: