■
For 3.5" Drives
1 In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2 Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3 Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4 Install the new drive.
(1) Press the catch on the drive lock lever to unlock it.
(2) Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock
lever is still left open.
Chapter 5
Component Expansion/Function Enhancement
5.1 Installing Additional Drives
72
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0
To Next Page
Loading...
