4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 201
4
8. Select a job from the list.
9. Select the [OK] button.
A job button is set on the "Job Menu Layout" area.
10. Repeat Step 4 through Step 9 as required for the number of job buttons.
To filter jobs, enter part of a "Job Name" and "Comment", or select all, and
press the [Find] button.
"Job Name" may be up to 64 characters long.
"Comment" may be up to 256 characters long.
To clear all filtered results, delete the entered "Job Name" and "Com-
ment", and press the [Find] button.
z Up to six job buttons can be set.
z To delete a job button, select the job button that you want to delete and
press the [Delete] button.
To Next Page
Loading...
