Fujitsu Primepower200 - Names and Functions of Parts

7.2 Names and Functions of Parts
7.2 Names and Functions of Parts
This section describes the names and functions of parts on the front, control panel and rear of the
PRIMEPOWER600 Pedestal Server.
7.2.1 Front side
The names and functions of parts on the front of the PRIMEPOWER600 Pedestal Server are as follows.
CD-ROM Unit
(1) Control Panel
Floppy Disk Unit
(maintenance only)
(2) Front Panel
(open)
8mm Tape Unit or
DAT (DDS4) Unit or
DLT Unit (option)
Figure 7.2 Front of PRIMEPOWER600 Pedestal Server
(1) Control panel
Contains various switches and indicator LEDs. See "7.2.2 Control Panel" for details.
(2) Front cover
The panel cover can be opened to its right after being unlocked.
The LCD panel and the POWER and CHECK LEDs can be checked with the cover closed.
117