Fujitsu Primepower200 - Post Error Messages

13.5 Post Error Messages
13.5 Post Error Messages
Table 13.7 shows the names of typical components that are displayed on the LCD panel when POST detects an
error.
Table 13.7 Post Error Messages
CPU module in CPU slot #y
on Systemboard #x.
Memory module in memory slot #yy
on Systemboard #x.
Memory module(s) inserted in
incorrect slots.
Systemboard #x.
Systemboard #x.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #0.
Systemboard #x itself or PCI card in
PCI slot #y on Systemboard #x.
NVRAM chip on Systemboard #x.
CPU module
Memory module
Misconfigured memory module(s)
Counter timer
PCI interface
SCSI interface
Ethernet interface
Keyboard interface
Mouse interface
Floppy disk interface
Serial interface
PCI slot or PCI card in PCI slot
NVRAM chip
0x-CPU#y
0x-SLOT#yy
Mem config error
0x-U2P(Timer)#y
0x-U2P#y
00-SCSI#x
00-PCIO(LAN)
00-SuperIO(KB)
00-SuperIO(Mouse)
00-SuperIO(FDC)
00-ESCC(TTY)
0x-PCI#y
0x-TOD/NVRAM
Message (2nd line) Location of Error Part to Replace
237