Fujitsu Primepower200 - Names and Functions of Parts

3.2 Names and Functions of Parts
3.2 Names and Functions of Parts
This section describes the names and functions of parts on the front, control panel and rear of the
PRIMEPOWER200 Rackmount (4U) Server.
3.2.1 Front side
The names and functions of parts on the front of the PRIMEPOWER200 Rackmount (4U) Server are as follows.
CD-ROM Unit
(1) Control Panel
8mm Tape Unit or
DAT(DDS4) Unit (option)
Figure 3.2 Front of PRIMEPOWER200 Rackmount (4U) Server
(1) Control panel
Contains various switches and indicator LEDs. See "3.2.2 Control Panel" for details.
3.2.2 Control panel
The PRIMEPOWER200 Rackmount (4U) Server is provided with the control panel shown in Figure 3.3 .
REQUEST RESET
AUTO
MANUAL
(3) REQUEST Switch
SECURE
CHECK
POWER
(1) RESET Switch
(2) MODE Switch
(6) CHECK LED (Amber)
(7) POWER LED (Green)
(5) POWER Switch
(4) LCD Panel
Figure 3.3 Control Panel
Note: To prevent erroneous operation, all push-button switches on the control panel are designed not to
function unless held down for at least 0.3 seconds.
27