2.3 Preparations for Use
Procedure
1 Turn the AC main line power on.
2 Turn the power switches of the server unit (AC main line switch), console terminal and
peripheral devices on.
Figure 2.5 Turning the power on
3 Press the POWER switch on the control panel of the PRIMEPOWER200 Pedestal Server.
The POWER LEDs of the PRIMEPOWER Server and any peripheral devices connected via the
RCI port should now light up.
Note: Operation of the POWER switch is disabled when the MODE switch is set to SECURE.
A keyboard power-on function is not supported.
15
To Next Page
Loading...
