EasyManua.ls Logo

Fujitsu Primepower200 - Overview and Key Features

Fujitsu Primepower200
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server
5.1 Overview
The following describes the key features and appearance of the PRIMEPOWER400 Rackmount (4U) Server.
Key Features
The server unit can be configured with up to four CPUs.
Up to 16 gigabytes of memory can be mounted.
Six PCI slots (2 x 33/66MHz + 4 x 33MHz) are provided.
Up to two UltraSCSI disk drives can be built in.
One tape unit (DDS4 DAT or 8mm) can be installed.
A CD-ROM drive is provided as standard.
One 100Base-TX port, two serial ports (RS-232C) and one keyboard/mouse port are provided
as standard.
Redundant fan and N+1 redundant power supply configurations are supported.
Appearance
The following illustrations show the appearance of the PRIMEPOWER400 Rackmount (4U) Server.
CHECK LED (Amber)
POWER LED (Green)
Figure 5.1 PRIMEPOWER400 Rackmount (4U) Server
5.2 Names and Functions of Parts
This section describes the names and functions of parts on the front, control panel and rear of the
PRIMEPOWER400 Rackmount (4U) Server.
68

Table of Contents

Related product manuals