Fujitsu Primepower200 - Disk Drive Configuration

CHAPTER 9 Expansion Disk Cabinet
9.4 Disk Drive Configuration
Up to ten hot-swappable UltraSCSI disk drives can be built into the Expansion Disk Cabinet. The disk drive cages
shown in Figure 9.3 can be accessed by removing the front bezel. The base disk cage (bays #1to#5) and the
expansion disk cage (bays #1to#5) are connected to the PRIMEPOWER Server by separate SCSI buses.
ACTIVE LED (Green)
FAULT LED (Amber)
#1
#2
#3 #4 #5
#1
#2
#3 #4 #5
Disk Expansion Unit (option)
Base SCSI Unit
POWER LED
(Green)
Base
Interface Board
Expansion
Interface Board
(option)
Figure 9.3 Full Disk Drive Configuration of Expansion Disk Cabinet
174